Outriggers: H-4-Point design; Vertical and horizontal agitation fully hydraulic; 4 loose outrigger pads incl. transport storage and stowage; Manual or automatic levelling alternatively; 4 outrigger bases

Engine: Daimler AG; Output 450kW (612HP), Torque 2700Nm, certifications in accordance with EURO MOT 3a, TIER 3, CARB; Exhaust system cpl. stainless steel, incl. spark arrester, certification inaccordance with 94/4/EC (ATAX Directive) & EN1834-4. Fuel tank: 630l; Fuel: Diesel or alternatives (no RME/ Bio-Diesel); Supplies carrier and crane (50 l buffer tank at crane)

Transmission: ZF AS-Tronic; Automated gearbox with integrated hydraulic retarder, 16 forward speeds and 2 reverse; 2-stage transfer case with switchable off-road gear

Axles: 12 x 8 x 10; 6 Axles, axles 2,4,5,6 driven and equipped with selectable transverse lock, axles 4,5 with selectable longitudinal lock; axles 1,2,3,5,6 steered, axle 4 liftable

Suspension: Hydropneumatic suspension with axle load compensation; Hydraulically lockable; Manualor automatic levelling alternatively

Steering: Dual circuit hydro semiblock steering with emergency steering pump; Active rear axle steering (axles 5&6) with 6 different steering programs

Brakes: Pneumatic dual circuit service brake with antilock system, acting on all wheels; Disc brakes;

Hydraulic retarder integrated into transmission as sustained-action brake; Additional exhaust brake

and constant throttle valve; spring-loaded parking brake

Wheels: 395/95R25 (14.00R25); Steel rims 9,5-25/1,7"

Cab: Wide version 2,88m; 2 adjustable seats with seat heating, armrests and pneumatic suspension;

steering wheel height and tilt adjustable; Power door windows

Tinted safety glass; engine-dependent water heating; Fire extinguisher; Air condition, Radio CD-Player

Tachometer MTCO: Speed indication and analogue tracking on paper disc

Stowage: Open storage boxes for lifting accessories; Lockable compartments

Miscellaneous: Central lubrication; Ascendencies; Loose stepladder; Electronic immobiliser system incl. 3 keys

Tempomat Telescopic boom HA: 15m - 64m; Single cylinder telescoping system, manual or automatic telescoping alternativly.

Attachments for all equipment and extensions; 6 sheaves integrated in boom head for max. capacity of 134,5t

Counterweight: 35,2t, 4 pieces; Automatic rigging system; Expandable to max. 116,8t; Max. 8,2t can

be carried on board serially

Boom luffing: 1 luffing cylinders with automatic lowering brake valve

Rotary drive: 1 slewing gear unit with spring-loaded multi-disc brake; Different operating modes selectable

Engine: Daimler AG; Output 205kW (279HP), Torque 1100Nm, certifications in accordance with EURO

MOT 3a, TIER 3, CARB; Exhaust system cpl. stainless steel, incl. spark arrester, certification in accordance with 94/4/EC (ATAX Directive) & EN1834-2

H1: Hoist with spring-loaded multi-disc brake;Rope twist prevention; resolver 

Drive: Hydraulic system with power control; Axial-piston dual pump and 2 separate pumps for rotary drive and auxiliary consumers; Hydraulic oil cooler Control system: Pump control for 4 simultaneous working movements; electric pilot controls via 2 two-axis joysticks; different control modes selectable for hydraulic circuits; Memory for individual operator settings

Operator aids: Demag IC-1, with integrated electronic load moment indicator; Colour display;

Displaying of current operating conditions, load charts, fault indicator; Outrigger load indicator; Working range limiter

Acoustical and optical (pre-) warning when approaching limit devices and conditions; Signal lights indicating LMI-load on crane cab; Crane data logger

Cab: Version 0,88m; Tilt infinitely variable 20°; Seat heating; Sliding window in door and rear; Fold-out

front window; Extendable side pedestal, foldable front pedestal; Handrails

Tinted safety glass; pull-down sun visor and light curtains; engine-dependent and independent heating with timer; Air condition; Radio CD-Player

Miscellaneous: Safety balustrade and handrails for crane cab access

Painting T: Duplex basecoat, topcoat in Terex standard RAL 1013 "Pearl White" and RAL 7012 "Basalt Grey"

Illumination: Work lights: 1 for hoists and rigging, 1 adjustable for work prefield at crane cab, 1x engine

area crane, 4 for outriggers; Rotary beacons: 2x on carrier cab, 2x on crane tail

Anemometer: Disconnectable, to be used with all extensions

Basic Machine

Rooster Sheave

MS (Runner) 3.0m

Second Hoist Drum H2

Luffing Jib 72m

Add. counterweight 81,6 tons

Superlift

Hook Block 200-9-23-D

Hook Block 80-3-23-D

Single Line Hook 12,5-0-23-E

Heavy Lift attachment S1:4 additional sheaves

Outrigger quick connection

Tyres 525/80R25 (20.50R25), Steel Rim

Out of crane cab adjustable xenon floodlight, at front support boom base section

Positioning light

Central lubrication superstructure

quick connection telescopic boom

Dolly support bracket

Dolly prep